sony VGP-BPS3 battery

For consultants in the research department of the latest energy industry that in 2008 China's output of photovoltaic cells of 1.78GW, PCGA-BP71,accounting for 26% of the global total. Among them, the leading domestic solar cell production plant in 2008 was about Suntech 500MWp, ranking third in the world, and the output of Yingli 281.5MWp, Trina Solar output about 200MWp.
In 2008 the European companies accounted for production of photovoltaic cells worldwide, representing a ratio of 27%, slightly higher than the 26 percent Chinese. The world's leading solar cell factory in Germany Q-Cells still continue to re-output to 574 megawatts (MWp).
U.S. companies accounted for the global production of photovoltaic cells, representing a ratio of 14%.VGP-BPS3, One of cadmium telluride (CdTe) thin-film plant First Solar, output 503MWp, 2008 the world's second largest solar cell manufacturers. In addition, Japanese firms in 2008 total global production of photovoltaic cells, representing a ratio of 16%.
Market share from the point of view, the Chinese solar cell manufacturers (including Taiwan Province) market share increased year by year, in 2007 Chinese solar cell manufacturers market share in 2006 from 20% to 35%, then further in 2008, increased to 44% for two consecutive years become the first in the world. Motech Taiwan in 2008 output of photovoltaic cells at between 270 ~ 280MWp. the article come from http://www.new-laptop-battery.com .

Tags:
Daimler will be released in June of fuel cell hybrid bus
Germany's DaimlerChrysler (Daimler) will be in June 2009 in Vienna, Austria, the "World Congress and Mobility City Transport Exhibition" (09 years June 7 ~ 11 day), the released Mercedes-Benz (Mercedes-Benz) brand of fuel cell hybrid bus "Citaro FuelCELL Hybrid".
In 1997 the company released the world's first fuel cell system equipped with a pilot bus "NEBUS". VGP-BPS3A,The Citaro FuelCELL Hybrid development NEBUS are an extension of the car absorbed the fuel cell system equipped with the "Fuel Cell Citaro" and "Citaro G BlueTec Hybrid" diesel hybrid power system technology elements. Citaro G BlueTec Hybrid and shared with wheel motor (Hub Motor) of axles, lithium-ion rechargeable battery as well as electrical components to provide electricity supply systems. In addition, sophisticated hybrid drive system control, than the original fuel-cell buses to reduce the hydrogen fuel consumption.
DaimlerChrysler is scheduled to begin the near future as the day-to-day running of several buses in the European city of empirical experiments. Experiments will be based on 2003 ~ 2006 the European Union (EU) to implement the fuel cell bus Empirical experiments "CUTE (Clean Urban Transport for Europe)" to carry out. CUTE plan by the company in three countries 12 transport operators in the implementation of 36 of the Fuel Cell Citaro run. Total run 135,000 hours, run two million km, VGP-BPL4,experimental results show that as at the urban fixed route daily on public buses, and its adaptive up to 90 ~ 95%. The article come from http://www.batteryoffice.com .

Tags:
Kobe, Japan Iron and Steel add solar cell research
Japan's Kobe Steel will add solar cell research field. The company will provide R & D industry plasma chemical vapor deposition (CVD) to create devices. The company intends to use continuous coating device, in soft plastic substrate coated with metal film, provided to the soft plastic substrate production industry as a R & D use. Because of expected future growth of thin film solar cell potential, the company's proposed research and development process to test the use of metal foil substrate made of film-forming device.
Kobe Steel products to be produced will be soft plastic substrate into a roller-shaped volume, VGP-BPL4A,continuous use of plasma CVD coating device, known as the "W35 Series", specialized as a research and development or use on aircraft production. Price is about 1-200000000 yen around. Size dimensions of 1.5 meters wide, 3.2 meters deep, 2.5 meters high. Although the volume, but heat can be set at 300 degrees Centigrade temperature environment, and conducting research on a number of functions required.
Because the United States have been successfully developed for the metal foil substrate, the use of printing production CIGS thin film solar power technology company, therefore, necessary to consider small devices, is actively working on research and development and for marketing. The article come from http://www.battery-base.com